Skip to content

Swept-path modes

Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.

SteerSim places the selected aircraft along the path you drew and shows nose-gear, main-gear, wingtip and tail envelopes. A runway turn-pad 180° uses the same envelopes.

Cockpit over centreline (default)

The cockpit follows the drawn line. Main gear trails it. This is a planning model, not published validation against manufacturer turning diagrams.

Judgemental oversteer

The nose-gear track is a smooth curve outside the turn (not a jog at each taxiway vertex). Main gear and wingtips follow that nose path. This is an extreme “main gear near centreline” case. It is not manufacturer-validated oversteer.

What the envelopes include

  • Nose-gear track
  • Inner and outer main-gear wheel tracks
  • Wingtip envelope
  • Tail / horizontal-stabiliser envelope

Where the aircraft database does not publish a station, the planner uses labelled planning assumptions. Those labels appear in the inspector. There is no steering-angle limit, no tyre-slip model, and animation speed is display-only.

See Methodology and limitations.

For a longer explanation of wingtip paths, oversteer and gear cut-in, see Aircraft taxiing wingtip clearance. For gear-to-pavement-edge clearance, fillets and taxiway edge safety margin, see Landing gear clearance on taxiway pavement.