Skip to content

Getting started

Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.

SteerSim runs in the browser. You do not need a CAD licence.

Open the planner

  1. Open the planner.
  2. Search for an airport by ICAO code or name (at least two characters).
  3. Pick an airport. The planner loads OpenStreetMap aeroways (runways, taxiways, aprons, stands and holding positions) and shows them on a local metric map. On a phone the map opens in Pan so one-finger drag moves the map. If that map has no aeroways, choose Assisted layout, Draw on satellite, or Blank grid. See Assisted layout and Draw an airfield by hand.
  4. Or click Sample airport for a generic OSM layout, or Manual drawing sample for a hand-drawn code C airfield on a blank grid.

Imagery and OpenStreetMap are for concept planning. Verify with surveyed data before design use.

Under 60 seconds to a path

  1. Open the Aircraft list. A common narrow-body type is selected by default.
  2. Press L (polyline) and click two or more points on a taxiway centreline. Snap is on by default.
  3. Press Enter. The inspector shows wheel-to-edge and wingtip-to-object checks in green, amber or red.
  4. Press Space to animate.

Press ? for the keyboard list. The command bar at the bottom of the map accepts typed instructions such as Taxi A380 from twy C to stand V7, A380 180 on the 34R turn pad at OTHH, or show jet blast for A388 at stand 501 breakaway. See Command bar. Jet blast (estimate) is off by default under Layers.

Pilot mode

Pilot is a dropdown-only taxi route for a takeoff or landing. It does not draw by hand. Choose an FAA ACD aircraft, Takeoff or Landing, then stand, taxiways and runway from the OpenStreetMap graph. On iPad and desktop the steps sit in a collapsible left sidebar; on a phone they slide over from the left. When a replay starts the sidebar collapses so the map is fully visible. If the OSM graph cannot complete the route, a prompt offers Use manual simulation (leave Pilot and draw) or Change selection. See Pilot mode.

Save

  • Not signed in: Save keeps the project in this browser.
  • Signed in: Save stores the project on your account.
  • Share creates a read-only link. Drawing tools lock; export and comments remain.
  • Export can save DXF, PDF, PNG, GeoJSON, or a simulation video of the current path.

Plans

Paid features are free during the beta. See Pricing.

Help

See the FAQ, or email support@steersim.com. In the planner, the help control opens keyboard shortcuts and a contact link.