Clearance standards
Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.
Live colouring: green pass / amber warning or verify / red fail. Warnings and verify items are for you to check on site. Only a taxiway narrower than the main-gear span plus the required wheel-edge margin is a fail.
Project setting
Pick Clearance standard in the inspector. The choice is stored with the project, share links and exports.
Swipe to see all columns
| Setting | What it uses | Default |
|---|---|---|
| FAA (ADG / TDG) | FAA AC 150/5300-13B airplane and taxiway design groups | US airports |
| ICAO Annex 14 (code letter A–F) | ICAO Annex 14 Volume I numeric cells, cross-checked with EASA CS-ADR-DSN | Non-US airports |
| Custom | Local airport numbers you type. Unset fields keep the ICAO template. Flagged Custom on every export | Never defaulted |
You can override the country default on any project. Visual docking guidance (reduced stand clearances) is a separate option and is off by default.
Checks
- Wheel-to-pavement-edge
- Wingtip-to-object on the swept path
- Wingtip-to-wingtip and wingtip-to-object on stands
- Wingtip-to-taxilane centreline
- Unknown when pavement cannot be built from the map
Each finding shows measured vs required, a short note, and a citation that names the standard, table or paragraph, and edition.
The map can draw clearance envelopes on a simulated path:
- Wingtip clearance — offset from the swept wingtip track using the selected standard
- Main-gear wheel-to-edge — offset from each outer main-gear track
Where an envelope hits an object or leaves mapped pavement, that segment is amber and is listed with warning markers. No obstacles or no pavement is verify, not a fabricated pass. Toggle Clearance envelopes on the Layers panel (on by default). Fillet availability and surrounding apron space are not known to this tool.
Limits of the comparison
FAA and ICAO are not interchangeable unit conversions. A gap that is amber under one standard can be green under the other. Always open the current advisory circular, certification specification or Annex text for the aerodrome you are designing.
See Methodology and limitations.
For background on why wingtip and gear clearance matter while taxiing, see Aircraft taxiing wingtip clearance and Landing gear clearance on taxiway pavement.