Schematic aircraft planforms
Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.
SteerSim draws a true-to-scale top-down outline (planform) at each simulated pose, on stands, and in DXF / PDF / GeoJSON exports.
The caption in the map, inspector and exports is:
Schematic planform, scaled from published dimensions
That is deliberate. The outline is not a manufacturer drawing.
The inspector also shows how many of the schematic fields are cited numeric facts versus flagged estimates.
What is cited
For each FAA Aircraft Characteristics Database type (and for custom types from the dimensions you enter):
- Wingspan (including the with-winglets span when the database publishes both)
- Overall length
- Wheelbase
- Engine count
- Main-gear width
For several common types, additional figures come from public EASA or FAA Type Certificate Data Sheets (for example fuselage diameter or engine envelope size) where those documents publish them.
Winglets and similar tip devices are drawn when the database lists a larger with-winglets span. Extra span is exact when both columns exist; device shape is an estimate.
What is estimated
Proportions that are not published in the aircraft database or a type certificate stay estimate. The inspector lists the remaining estimate count. See Methodology.
Map
Toggle Schematic planform in Layers. Ghost poses are a second toggle; opacity is a slider. The ICAO designator (for example B77W) is drawn on the fuselage and stays upright. Type labels (short name) is an optional callout beside the nose and is off by default.
Exports
DXF, PDF and GeoJSON carry the outline, the fuselage designator, the schematic caption and the sourced-versus-estimated count.