Draw an airfield by hand
Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.
Use this when OpenStreetMap has no aeroways, the taxiway network is missing, or you want a concept sketch before surveyed CAD arrives.
Full walkthrough (MP4) — about two minutes, 1080p. Imagery and OSM are for concept planning; verify with surveyed data.
Steps
- Open Start from airport and search by ICAO or name (OurAirports, CC0).
- If OSM returns nothing, or you prefer to sketch, choose Draw on satellite or Blank grid.
- Draw on satellite centres Esri World Imagery on the airport in a local metric frame, with a scale bar. Do not trace tiles into drawings.
- Blank grid is the same local frame without imagery — useful when you only need metres.
- Draw a runway (two clicks), a taxiway centreline (set width in the toolbar, Enter to finish), an apron polygon, then stands.
- Snap stays on by default so taxiway ends meet.
- Pick a FAA ACD type (for example A320, code C), draw a taxi path, and read the inspector colours.
- Fillet from path sketches extra pavement at a turn. Pushback tags a reverse manoeuvre.
- Export → PDF report writes the suitability page with the same disclaimer and attributions.
A bundled Manual drawing sample (blank grid, hand-drawn code C layout, A320 taxi, fillet and pushback) is on the start wizard and on the Project panel when nothing is loaded.
What this is not
- Not a surveyed as-built.
- Not a trace of Google or Esri pixels into CAD.
- Clearance colours are a planning aid. They are not published validation against manufacturer turning diagrams.
Attributions
- Imagery: Tiles © Esri — Source: Esri, Maxar, Earthstar Geographics, and the GIS User Community. Display only.
- Airport layout when OSM is used: © OpenStreetMap contributors (ODbL).
- Aircraft dimensions: FAA Aircraft Characteristics Database, October 2024 (US Government work, public domain, 17 USC 105). Verify against the manufacturer Airport Planning Manual.