Skip to content

Methodology and limitations

Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.

SteerSim is a browser planner for airside ground movement. Draw a path on an airport map, place an aircraft type on that path, and read swept-path envelopes and clearance colouring. Outputs are a planning aid. They are not manufacturer-validated turning diagrams, certified surveys, or a substitute for a qualified airport engineer.

Assumptions that are not manufacturer-validated are labelled in the inspector and on exports. Do not describe SteerSim outputs as manufacturer-validated.

What you provide

  • An airport: search by ICAO or name, or use the sample layout
  • An aircraft type from the FAA Aircraft Characteristics Database, or a custom type you enter
  • A taxi, pushback, stand, or runway turn-pad 180° path you draw or type in the command bar
  • Optional imports: DXF, GeoJSON or KML overlays, and licensed jet-blast contours if you hold them
  • A clearance standard: FAA, ICAO, or custom local numbers

What you get

  • Wheel, wingtip and tail envelopes along the path
  • Green / amber / red clearance findings against the selected standard
  • Fillet and stand sketches
  • An estimated jet-blast layer (off by default)
  • DXF, PDF, PNG and GeoJSON exports, each carrying the liability notice

Map and path

Geometry is computed in a local metric frame centred on the airport. Map tiles are for display only and are not a survey.

Swept path follows the line you draw. Cockpit over centreline keeps the cockpit on that line; judgemental oversteer draws a smooth nose-gear curve outside the turn, with the main gear trailing it. There is no tyre-slip or steering-limit model, and animation speed is display-only.

Where the FAA database does not publish a station (for example nose or tail), the planner uses labelled planning assumptions. Those labels appear in the inspector. Do not treat them as manufacturer data.

Runway turn pad 180°

The aircraft is placed on the runway centreline at a chosen end and turned through exactly one 180° reversal at the generic 50° design steering limit (or a max nose-wheel angle you enter). Swept tracks are the same nose-gear, outer main-gear wheels, wingtips and tail envelopes as taxi. Integration stops once heading change reaches 180° and the path is back on the centreline — it does not loop.

Pads are mapped OpenStreetMap turn-guidance lines at the threshold, turning loops (aeroway=turning_loop), modest apron polygons, or the paved widening of the runway end itself. A derived strip aligned with the runway is last resort, not a free-rotated square. Wheel-to-edge uses the same ICAO Annex 14 / FAA AC 150/5300-13 table as other runs. Overruns are shown in red. If the 180° cannot keep the required outer-wheel clearance, the planner says the turn is infeasible and reports derived minimum pad and runway widths for this type. Those widths are not a published turn-pad table and are not manufacturer turning data.

Towing and pushback

Pushback uses a generic tug and towbar, or a towbarless hitch locked to the nose gear. Default sizes are round planning figures, not a named ground-support model. Replace them with the operator’s data before design use.

Fillets

Fillets are sketched from the simulated inner-gear path and published wheel-to-edge distances. They are not FAA Advisory Circular 150/5300-13B Appendix J lookup tables.

Clearance

Clearance numbers come from FAA AC 150/5300-13B (public domain United States Government work) or from ICAO Annex 14 Volume I numeric cells, cross-checked with EASA CS-ADR-DSN. We do not copy Annex 14 prose. The two systems are not unit conversions of each other. Custom local rules replace cells you type and are flagged on exports. Gaps that cannot be computed are labelled instead of guessed.

Fillet availability and pavement around taxiways and aprons are not known to this tool. Findings other than a taxiway-width fail are warnings or verify items for you to check on site. Only a taxiway narrower than the aircraft main-gear span plus the required wheel-edge margin is reported as a fail.

Visual docking guidance (reduced stand clearances) is off by default.

Schematic planforms

Outlines are scaled from published dimensions (FAA Aircraft Characteristics Database and cited type-certificate figures where they exist). Remaining proportions are flagged estimates. They are labelled Schematic planform, scaled from published dimensions. They are not manufacturer outlines.

Jet blast (estimate)

The in-app jet-blast layer is an estimate based on published open plume models and FAA AC 150/5300-13B thresholds. It is not a manufacturer contour. You can import your own licensed contours to override the estimate for a type and thrust setting. SteerSim does not ship Boeing or Airbus airport-planning-manual figures.

Layer label: Jet blast (estimate). Off by default.

Jet blast contours

Turn the layer on in Layers. Thrust is Idle by default. Idle uses the ICAO idle setting of 7% rated thrust. Breakaway is an estimated planning setting and is labelled as an estimate. Takeoff is full rated thrust.

Breakaway at turns previews breakaway contours at turns along the path. Leave it off unless you want that preview.

Each contour is an FAA AC 150/5300-13B Table C-1 air-velocity threshold:

  • 21 km/h · light debris — lower bound of the 21–29 km/h light-debris range. Off by default.
  • 29 km/h · debris — upper bound of that light-debris range. On by default.
  • 38 km/h · pedestrians — pedestrian areas. Off by default.
  • 48 km/h · ramp staff — ramp personnel and light objects. On by default.
  • 56 km/h · service roads — service roads and the area behind parking positions. On by default.
  • 80 km/h · structures — structures and boarding equipment behind the aircraft after pushback. Off by default.

Toggle each contour in the jet-blast section of Layers. Hidden contours are not drawn on the map, in the legend, or on PDF, DXF and video exports.

Warnings still check the 38 km/h pedestrian band and the 48 km/h ramp band even when those contours are hidden.

Estimated from open jet-plume model and FAA AC 150/5300-13B thresholds, not manufacturer data. Verify with the aircraft manufacturer for design.

Exports

Every PDF, DXF, GeoJSON and video file repeats the liability sentence. Free-plan exports are watermarked. Missing checks say “not computed” — numbers are never invented.

The PDF is a Ground manoeuvring suitability report. Overall PASS / WARNING / VERIFY / FAIL and every table cell are measured from the same checks you see in the planner. A run with only warnings or verify items is never labelled FAIL.

What we do not claim

  • Match to Boeing / Airbus turning diagrams
  • Certified survey accuracy of OpenStreetMap or Esri imagery
  • Match to manufacturer jet-blast contours
  • That schematic planforms are manufacturer outlines

All timestamps in the product are UTC.