Skip to content

Assisted layout

Planning aid only. Results must be verified by a qualified airport engineer against manufacturer data and applicable regulations.

Use Assisted layout when OpenStreetMap has no usable aeroways for the airport you selected. The planner places a draft from public runway records and simple templates. There is no AI step and no paid map lookup.

Every assisted element is labelled Assisted draft - verify against surveyed data/imagery.

Start

  1. Open the planner and search for an airport.
  2. If aeroways cannot be loaded, choose Assisted layout (next to Draw manually).
  3. Runways come from the public OurAirports runway list (CC0). You then add taxiways, an apron and stands.

If a runway has no published ends, it is placed from heading and length at the airport reference point and marked approximate - adjust.

Templates

Choose the aircraft design group. The parallel taxiway uses the published runway-to-taxiway separation and taxiway width for that group (ICAO Annex 14 or FAA AC 150/5300-13B, matching the project clearance standard). Pick the side of the runway and whether the taxiway runs the full length.

Connectors can be 90° or rapid-exit. Fillets use the same fillet tool as a path you draw yourself.

The apron is a rectangle beside the parallel taxiway. Stands are spaced for the selected aircraft and the required stand clearance.

Edit and export

Drag handles, snap to ends and centrelines, or type a length or offset in the inspector. Save as a normal project. DXF, PDF and GeoJSON record that runways came from OurAirports and the rest is user-drawn, and they keep the usual source attributions.

Do not treat an assisted draft as surveyed as-built data.